Baza znanja

How To Diagnose What Is Wrong With Your Stream  Ispiši članak

There are several tools that are useful try to figure out why you can not connect to your WRWN stream, or why it is buffering.

1- Perform a ping to the host .. EXAMPLE:

  • Go to a command prompt > START > RUN > CMD
  • Issue the following command: ping us1.streamingpulse.com  (or the address of your broadcast server)
  • You should see no time outs and the time should be reasonable 300msec or less .. 100msec or less is best

2- Perform a Trace Route

  • Go to a command prompt > START > RUN > CMD
  • Issue the following command: tracert us1.streamingpulse.com  (or the address of your broadcast server)
  • Look at each hop to make sure there aren't timeouts

3- Do a WinMTR test

  • Download  the following free software, WinMTR.
  • Install the software
  • Easy to run .. doing 1000 iterations is best
  • Save the info in a text file and post it to the ticket, if requested
  • This is similar to the Trace Route, but with more information
  • Look to see if there are any trouble hops along the way

sometime the problem isn't with the Web Radio World's server, but communications along the way.

If the very 1st hop is having problems, check your NIC and / or your RJ-45 patch cable to the router / hub / switch.

If all else fails, put in a Support Ticket

Je li Vam ovaj odgovor pomogao?

Vezani članci

Error 10060 and 10061
This document shows some of the most common error and information codes you might encounter with...
Unable to send data fast enough
Here's an analogy that might help you with the problem - The error you are receiving is roughly...
My ShoutCast Stream is Skipping. Why?
The stream skipping and cuts off when I'm broadcasting If you're experiencing audio skipping or...
Error By Numbers For Sam Broadcaster
110 - Unable to connect to xx.xxx.xxx.xxx:1221. Station might be offline. Connection timed out...